3M™, 7010493410, Grinding Wheel, Series: 654BJ, 6 in Wheel Diameter, 0.035 in Wheel, 1-1/4 in Center Hole, D100 Grit, Diamond Abrasive, 2200 to 3400 sfpm Fluting, 4500 to 6500 sfpm Gashing, 4500 to 5500 sfpm OD and End Work Maximum, Resin Bond, Applicable Materials: Carbide, Non-Ferrous Metals, PCD, Cermet's and Polycrystalline CBN/Diamond (PCBN), Wheel Type Number: 1A1R

Fast and free cutting, the 3M™ cut-off wheel 654BJ is used to trim carbide cutting tool blanks to length for the cutting tool manufacturing industry. This 1A1R wheel is offered in offered in 100 and 220 grit in the following dimension: 6 inches in diameter,0.035 in THK and a 1-1/4 in arbor hole. Precise, efficient Cutting, part after part the 3M™ cut-off wheel 654BJ is. Designed for trimming carbide tool blanks to length. This fast and free cutting wheel is available in diamond grades of 100 and 220 and should be run with a water based coolant. The use of coolant is critical for it removes heat away from the workpiece and wheel, adds lubricity reducing grinding friction and helps to clear away swarf. Wheel design cut-off wheels are thin abrasive wheels typically used on the cutting end of the tool when re-grinding and on the shank end when forming a blank. The abrasive surface of the 3M™ cut-off wheel 654BJ is the periphery, where it is coated with diamond to a depth of 6.35 mm. This wheel generally cuts radially through the workpiece. (image) 3M™ super abrasive Wheels: ready to ship or custom engineered the 3M™ cut-off wheel 675BJ is part of its broad portfolio of super abrasive wheels, including general purpose and standard CNC grinding wheels, backed by technical support, available in stock, ready for shipment. 3M™ technical support will always work closely with you to find the right configuration of features to meet your target parameters consistently and efficiently or engineer a product that will. These diamond and CBN super abrasive wheels are designed for today's most challenging applications, from grinding hardened steels and super alloys to finishing materials like glass, ceramics and tough composites in automotive, aerospace, oil and gas, primary metal, medical and other areas where machining with conventional cutting materials is not cost effective because of the materials which need to be machined (glass, ceramics, carbides, etc.). 3M™ has the tools you need to achieve stringent geometry tolerances and finish specs, part after part.