Login
Our website has been updated as of Apr 26, 2025.
If you are unable to login with your password,
please try the Reset Password link.
If Reset Password does not respond with the a Password Reset message, please re-register your account.
Register
Guhring 9030810127000 3081 Type NF Center Cutting Standard Length Square End Single End High Performance End Mill, 1/2 in Dia Cutter, 1-1/4 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3-1/2 in OAL, nano-A™ Coated
Price$110.86
Item #GUH9030810127000
BrandGuhring
ManufacturerGuhring
Mfr. Model #9030810127000
Country of OriginDE
UNSPSC Code27112803
UnitEA
DGI AvailabilityCall for Availability
| Standards & Approvals |
|---|
| DIN 6535 |
| PROP65: This product contains Cobalt, a chemical known to the State of California to cause cancer |
Product Features
• Decreased cutting pressure and power consumption
• Vibration-free operation
• Increased feed rates possible
• Increased surface qualities
• Improved tool life
• Variable helix
• Unstable Conditions - Standard cooling, average performance and medium to long-chipping
• RF 100 NF - For materials up to 28 HRc
• 36/38 deg helix angles with innovative roughing geometry for very good workpiece surface finish
• 0.02 in chamfer
• h10 mill diameter tolerance
• h6 shank diameter tolerance
• External coolant
• Applicable on alloyed steel, stainless steel and Ti-special alloys
Description
Guhring High Performance End Mill, Type NF Center Cutting Standard Length Square End Single End, Series: 3081, 1/2 in Diameter Cutter, 3-1/2 in Overall Length, 1-1/4 in Length of Cut, 4 Flutes, Spiral Flute, 1/2 in Shank Diameter, Right Hand Cutting Direction, 36/38 deg Helix Angle, Weldon Flat Shank, Solid Carbide, nano-A™ Coated
Based on our RF 100 end mill now with variable helix angles in combination with a newly develped roughing geometry. The result is a dramatic increase in tool life in comparison to conventional rough milling cutters with round or flat knuckle-type teeth. At the same time, the surface quality of the workpiece is improved to a peak-to-valleyheight of appr. Ra = 2 to 3 um making in many cases finishing operations unnecessary. At the same time, the innovative design reduces power consumption in comparison to conventional RF 100 end mills allowing the application in unstable conditions and on less powerful machines.