Seco Turning Insert, VNGM Insert, 160408 Insert, Diamond, 3.75 mm Maximum Depth of Cut, 9.52 mm Inscribed Circle, 4.76 mm Thickness, 16 Seat, Negative Rake, MF1 Chipbreaker, 0.8 mm Corner Radius, 3.81 mm Hole Dia, Manufacturer's Grade: CP500, ANSI Code: VNGM332F-MF1 CP500, ISO Code: VNGM160408-MF1 CP500, 35 deg Included Angle, 0 deg Relief Angle, Neutral Cutting, Carbide, PVD-TiAlN+TiN Coated, Material Grade: M, S, For Use On: Stainless Steel, Super Alloys and Titanium

The Turning insert VNGM160408-MF1 CP500 features a negative type geometry with a clearance angle major of 0 degrees. It is made from a carbide PVD grade CP500. The insert has two cutting edges and a corner radius of 0.8 mm. With a cutting edge effective length of 15.2 mm, the insert is designed with a neutral hand orientation. It is primarily intended for machining steel and stainless steel. The insert is also partially applicable for cast irons, non-ferrous materials, superalloys and titanium, as well as hard materials. This product can be recycled. Get in contact with your sales representative to discuss next steps for more circularity. Check out more products for machine side or workpiece side options within our range to complement this product. With our complementing services, you can make the most of your tool. Download the Seco Assistant to get access to comprehensive tooling information. This text was generated and translated with the assistance of AI and may contain inaccuracies.