Login
Our website has been updated as of Mar 18, 2026.
If you are unable to login with your password,
please try the Reset Password link.
If Reset Password does not respond with the a Password Reset message, please re-register your account.
Register
Starrett® 252Z-24 Height Transfer Gage With Wood Case, 0 to 24 in, 7-1/2 in Base
Price$3,241.00
Item #SPT51216
BrandStarrett®
ManufacturerL.S. Starrett
Mfr. Model #252Z-24
Country of OriginUS
UNSPSC Code41111614
UnitEA
DGI AvailabilityCall for Availability
| Standards & Approvals |
|---|
| PROP65: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm |
Quantity
Product Features
• Extreme rigidity provides the vibration proof stability necessary to permit precise, repeat readings with indicators of the highest amplification
• Extremely rigid, rectangular box-type hollow column mounted integrally on a heavy base
• Adjusting mechanism is located in the base so the column and indicator are isolated and not affected by external factors, that is heat or hand pressure
• Hand-fitting base design for sure-grip handling and easy movement
• Bottom of the base has three ground and lapped pads for stability and smooth movement on the surface plate
• Adjustable slide, incorporating a snug for holding test indicators or electronic gage heads, has rapid vertical manual adjustment
• Thumb screw allows slide to be locked
• Knob on base allows fine vertical adjustment of the slide unit relative to the fixed column
• A snug on the slide provides two holes (.375 in 9.5mm and .156 in 4mm) for holding gage rods or scribers
• The rod has a major diameter of .375 in (9.5mm) and stepped diameters of 1/4 in (3.2mm) and 7/32 in (5.5mm) at one end and 5/16 in (8mm) at the opposite end
Description
Starrett® Height Transfer Gage, Series: 252, 0 to 24 in, 7-1/2 in Base Length, Steel, 26-1/64 in L x 4-1/2 in W x 7-1/2 in H
The Starrett 252 Height Transfer Gage is ideal for use with test indicators or electronic amplifiers to accurately transfer height settings from gage blocks, height gages and other standards. 0-24" (600mm) Range.