Login
Our website has been updated as of Feb 13, 2026.
If you are unable to login with your password,
please try the Reset Password link.
If Reset Password does not respond with the a Password Reset message, please re-register your account.
Register
Starrett® 696Z Distortion Dial/Strain Gage With Balancing Attachment, 2-3/8 to 18 in, 0 to 20 to 0 Dial Reading, 0.001 in, 1-29/64 in Dial, 3/16 in Tip
Price$902.00
Item #SPT52901
BrandStarrett®
ManufacturerL.S. Starrett
Mfr. Model #696Z
Country of OriginUS
UNSPSC Code41111630
UnitEA
DGI AvailabilityCall for Availability
| Standards & Approvals |
|---|
| PROP65: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm |
Product Features
• The dial indicator movement is approximately 5/32 in (4mm) and with rods and extension, provides a range from 2 3/8-18 in or 61-458mm
• There are 10 rods and one extension furnished
• Rods are marked to designate the approximate overall length of the gage
• Indicator has a movable bezel to adjust the dial in relation to the hand and a non-breakable crystal
Description
Starrett® Dial/Strain Gage, Distortion, 2-3/8 to 18 in, 0 to 20 to 0 Dial, Graduations: 0.001 in, 1-29/64 in Dial, 3/16 in Tip
Ideal gage for checking bearing alignment or shaft deflection without dismantling the engine. Also useful as a strain gage on engine frames. This inside measuring gage checks the distortion of crankshaft webs and bears a direct relation to existing misalignment or excessive bearing wear. Used on all diesel engine shafts and center crankshafts on any type of engine or compressor, the gage can also be applied as a strain gage on engine frames while the engine is operating. A comparison of readings taken at top and bottom positions indicates any misalignment of cylinder and frame which results in local over-stress and eventual cracking of the frame neck. Gage with Balancing Attachment, 2 3/8-18" Range neck.